Hydraulic Cylinder Hydraulic Cylinder
Hydraulic Cylinder

Design, manufacture all kinds of standard and non - standard hydraulic cylinder.

Hydraulic Cylinder
There are many types of hydraulic cylinder structure, and there are many kinds of classification methods: linear reciprocating motion and rotary swing type can be divided according to the mode of motion. It can be divided into single acting and double acting according to the liquid pressure. The structure can be divided into piston type, plunger type, multistage telescopic sleeve type, gear rack type, etc. According to the installation form can be divided into pull rod, earring, bottom foot, hinge axis and so on; According to the pressure level, it can be divided into 16Mpa, 25Mpa and 31.5Mpa.
Product categories
  • 1Cylinder Tube

    According to the work pressure,work temperature,work situation and other special requirements,different cylinder tube will be choosed.

    Cylinder Tube:cold drawn precision seamless steel tube,hot rolled seamless steel tube,forged tube.

    Tube Material: SAE1020(20#) , SAE1045(45#) ,16Mn(Q345B),27SiMn,etc.

    Surface Roughness:R0.16-0.32μm

    Inside Chromating:If necessary,inside tube will be chromated.

  • 2Piston Rod

    Rod Material:35#,SAE1045(45#),35CrMo,42CrMo4,etc.

    Technical Treatment: Quenched and tempered.1.5-1mm,or 1.03mm per millimetre.

  • 3Seal Kits

    According to customers' requirements and work condition,we will choose suitable seal kits,including:Hallite,NOK,SKF,Parker,Merker,Trelleborg,China made,Taiwan made.We will supply you suitable seal kits to ensure hydraulic cylinders a long lifetime,easy maintenance and simple repairing.

  • 4Inspection and Testing

    We have professional quality control department,every step from raw material to finished product is in the same factory,each procedure will be tested by professional inspector.

    Before hydraulic cylinder is assemblied , every spare parts would be measured and cleaned .After hydraulic cylinder is assemblied , pressure test would be carried out one by one.We ensure the testing pressure is 30%-50% higher than rated pressure in almost one hour's test.Each hydraulic cylinder must be tested without any leakage.

    We have professional quality control department,every step from raw material to finished product is in the same factory,each procedure will be tested by professional inspector.

    Before hydraulic cylinder is assemblied , every spare parts would be measured and cleaned .After hydraulic cylinder is assemblied , pressure test would be carried out one by one.We ensure the testing pressure is 30%-50% higher than rated pressure in almost one hour's test.Each hydraulic cylinder must be tested without any leakage.

    We can design and produce most kind hydraulic cylinder.Single acting,double acting hydraulic cylinder.Big size and little size hydraulic cylinder.3-6 stages Telescopic hydraulic cylinder.

    Construction Machinery cylinders for: loaders, excavator, forklift, bulldozer, dumper, roller, crane ,pump truck,garbage truck,garbage compactor and boat used hydraulic cylinder etc.

    Metallurgical Machinery cylinders for: decelerator, tile press etc.

    Mining Machinery cylinders for: crasher, coal cutter shield tunneling machine and dame gate etc.

    Agricultural & forestry machinery cylinders for: soil preparation machine, harvester, weeder etc.